Choosing Wisely: Number of Slats for Your Webbed Pine Bed Slat Set
Heavy Duty Cross Rail Kits for Metal Beds
From £99.95
FREE Length Cutting Service
Quick Manufacture and Dispatch
Quantity Discounts Available
Sustainable Products
100% Beech Timber
Delivered Nationwide
Advance Machining Option
Made in Europe, Customised & Machined to Size in London
No. Of Units
Estimated delivery In stock and ready to dispatch
Ask a question
Heavy Duty Cross Rail Kits for Metal Bed
Our Heavy Duty Cross Rail Kit is ideal to use on Metal Bed Frame and Antique Frames. This Product is an ideal solution if you do not have a centre rail on your metal bed Frame and you are unable to retrofit one.
The four cross rails should be placed width wise along the bed frame. Ideally you would place the first and last cross rails approximately 4 - 5 inches from the top and bottom of the bed. The other two cross rails should be spread evenly between the first and last cross rails.
You will need to measure from the outside edge of your side rail to the outside edge of your other side rail.
You will then be required to let us know the width of your bed side rails. We will take a rebate out of both sides of the cross rails to allow the cross rails to automatically lock into place (stopping them from slipping off the beds side rails).
We also put a locking mechanism on the first and last cross rails to lock our slatted base in place; stopping the bed bases from slipping off.
The cross rails are 60mm high, we will take a 30mm rebate out of the bottom of both ends of the cross rails. 30mm of the cross rail will be sitting on top of your bed side rails and the other 30mm will be sitting within you bed side rails.
The slatted bed base will sit on top of the cross rail kit. This will therefore increase the height of your mattress by 90mm (30mm from the cross rail kit and 60mm from the Slatted Bed Base.
Our Cross Rail Kits are suitable for metal beds only.
The length of the cross rail is available in different bed sizes and can be cut to your desired length.
This kit is ideal to use in conjunction with our Slatted Bed Bases ONLY
What makes our Sprung Bed Slats Specials?
Purchase direct from the Only Sprung Bed Slat Processor in the UK. We machine our Sprung Bed Slats In-House, making us the most versatile supplier in the UK. We offer advance machining options like Chamfering, Tapering and Bevelling allowing us to supply the correct solution for your requirements.
-
CHAMFERING
Upgrade to 10mm or 12mm Heavy Duty Slats. We will Chamfer the ends, so they will fit into your existing holders
-
TAPERING
Decrease the Gap in-between your slats. Fit wider slats into your existing holders
-
BEVELLING
Bevel the ends of your slats for Easy Attachement
-
BEECH
Beech Timber is undisputed the preferred Material for Sprung Bed Slats. Do not Settle for Birch or Popar Timber
-
QUALITY
We supply you the same quality slat that we use on our Premium Quality Slatted Bed Bases
-
SUSTAINABLE
Our Beech Sprung Slats are sourced from Managed and Sustainable Forest
-
PROCESSED IN LONDON
We purchase large Sprung Boards from Europe. We machine them to size in the UK. MORE Versatile and LESS Waste than our Competitors
-
FREE CUTTING
There is no Standard Length of Sprung Bed Slats. We offer a FREE length cutting service
-
WIDTH
We have listed Common Widths. We can also Manufacture Non-Standard width
-
8mm, 10mm and 12mm
We Supply 8mm Standard, 10mm Medium-Duty and 12mm Heavy-Duty Slats
-
CHAMFERING
Upgrade to 10mm or 12mm Heavy Duty Slats. We will Chamfer the ends, so they will fit into your existing holders
-
TAPERING
Decrease the Gap in-between your slats. Fit wider slats into your existing holders
-
BEVELLING
Bevel the ends of your slats for Easy Attachement
-
BEECH
Beech Timber is undisputed the preferred Material for Sprung Bed Slats. Do not Settle for Birch or Popar Timber
-
QUALITY
We supply you the same quality slat that we use on our Premium Quality Slatted Bed Bases
-
SUSTAINABLE
Our Beech Sprung Slats are sourced from Managed and Sustainable Forest
-
PROCESSED IN LONDON
We purchase large Sprung Boards from Europe. We machine them to size in the UK. MORE Versatile and LESS Waste than our Competitors
-
FREE CUTTING
There is no Standard Length of Sprung Bed Slats. We offer a FREE length cutting service
-
WIDTH
We have listed Common Widths. We can also Manufacture Non-Standard width
-
8mm, 10mm and 12mm
We Supply 8mm Standard, 10mm Medium-Duty and 12mm Heavy-Duty Slats
