Fourth Generation Sprung Bed Slat Kit Double Row

Our Fourth Generation Slatted Bed Base is Designed and Manufactured in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

The Fouth Generation Slatted Bed Base has Triple Pocket Suspension Slat Holders

Our Fourth Generation Double Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.  

This Double Row Sprung Bed Slat Kit is designed for two sleepers

Our Fourth Generation Double Row Kit consist of

2 Beech Ply Multiplex Rails; Pre-Drilled 
1 Solid Beech Centre Rails; Pre-Drilled for Holders and machined for Centre Rail Brackets
90 Quality Beech Sprung Bed Slats (25mm x 8mm) - May vary depending on the length specified
60 Triple Pocket Suspension Slat Holders, which are doweled using Pegs into the rails to add strength and durability
Pair of Metal Centre Rail Brackets with Wood Screw

Technical Information

Rail - 50mm x 20mm x 2000mm (Height including holders 85mm)

Centre Rail - 70mm x 35mm (Height including holders 105mm)

Gap in between Slats - Approximately 25mm between the holders and 15mm within the Triple Holders

Optional Extras

Suspension  Adjusters

You are able to adjust the Suspenion to three different firmness to your individual preference

Bed Frame (Measurements)

We offer a cutting service where we are able to cut the length of the rails to your exact length 

We are also able to cut the Beech Sprung Bed Slat down 

Measure the inside edge of your size rail to the inside edge of the other side rail; minus 22mm and divide by 2

For Examples 

If inside edge of your size rail to the inside edge of the other side rail is 1500mm.

1500mm - 22mm = 1478mm

1478 / 2 = 739mm

Your slats will need to be cut down to 739mm