Lift-n-Store™ Platinum Ottoman Lift-Up Bed Hinge - Two Position System
Product Details
Product Details
Platinum Ottoman/ Storage Bed Lift Up Hinge Mechanism with Gas Struts
Our Platinum Ottoman Hinge offer a Two Positions Lift-Up. The Mechanism will first move to a standard lift position (approximately 30 degrees), then can also move to a horizonal position if desired
The Horizonal Position makes this Bed Hinge different compared to our Premium Ottoman Hinge. There are two advantages of having the bed base in the horizonal position:
- Ideal to storage and access belonging at the back of the bed frame
- Ideal for changing bedding and reducing back strain
We stock a great range of Gas Struts that are each capable of delivering different forces; ideal for all bed sizes
They are ideal for both contract and residential Customers
These Ottoman hinges are Ideal for all bed sizes including all UK and European sizes. Depending on the size of the bed you have, you can decide whether you want to use one set of bed hinge mechanisms or two sets of bed hinge mechanisms
We recommend One bed hinge mechanism Set for beds up to 1400mm. Two Bed hinge mechanism Sets for beds over 1400mm; you can use one set; however, two sets give a more stable and gives you more options for gas struts.
The Ottoman Hinge are manufactured in Italy and the Gas Struts are manufactured in Germany. These are premium products; compared to other alternatives available in the UK market.
** Please Note: These hinges are not suitable for side opening beds that are smaller then a standard UK king (1500mm x 2000mm)
** Position 2 is only attainable via weight leverage.
Gas Struts Recommendation
The gas struts required will vary depending on
- Bed Size
- End Opening or Side Opening
- Lift Up Bed Base Construction (Slats or Sheet Material)
- Location of Hinge Mechanism
- Weigh of Mattress
It is extremely difficult to advise which strength gas strut you will
require for your bed.
When we refer Light and Heavy Below; we are referring to the Bed Base and Mattress. Manufacturing a bed base from sheet material would be classed as heavy and slats will be classed as light.
Small Single 2ft 6 and Small Single 3ft
Side Opening – Light 300N | Heavy 400N
End Opening - Light 400N | Heavy 500N
Small Double 4ft & Double 4ft 6
Side Opening – Light 400N | Heavy 500N
End Opening - Light 700N | Heavy 1000N
King 5ft
One Set
Side Opening – Light 700N | Heavy 1000N
End Opening - Light 1000N | Heavy 1250N
Two Set
End Opening - Light 400N | Heavy 500N
Super King 6ft
One Set
Side Opening – Light 700N | Heavy 1000N
End Opening - Light 1250N | Heavy 1750N
Two Set
End Opening - Light 500N | Heavy 700N
Its very much a case of trial and error, If you receive your order and you find that the gas struts are too strong or too weak, then you can send the struts back ( Keep actual ottoman mechanisms attach) and we can exchange them for you. You will need to pay for the delivery cost both ways.
IMPORTANT NOITICE
Our Ottoman Hinge Mechanism is ONLY recommended in manufacturing new bed frame.
You can use these for Exist Bed Ottoman Bed Frame; where you are replacing existing poor-quality lift-up Hinge Mechanism, or your existing hinges mechanism has broken. There are hundreds of ottoman bed manufacturer in the world, the attach holes on our Bed Hinge mechanism will not line up on the bed frame or bed base. You need to be prepared make new holes and make them work. It is never straight forward to replace these mechanisms unless you purchase them direct from the manufacturer of the bed frame.
Shipping Information
Shipping Information
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
From Our Journal
Helpful Articles and Buying Guides to find solution to common bed issues.
Understanding Sprung Bed Slats: Exploring Various Timbers
Comparing Timber Types: Beech, Birch, and Poplar for Sprung Bed Slats When it comes to choosing the right timber for your sprung bed slats, understanding the characteristics of each wood type is crucial. In this comprehensive guide, we'll explore three commonly used timbers for sprung bed slats: Beech, Birch, and Poplar. Beech Timber: The Undisputed Champion Renowned for its exceptional mechanical properties, Beech timber stands out as the premier choice for sprung bed slats. This hardwood boasts remarkable resistance to compression, making it ideal for supporting the weight of the mattress and sleeper. While Beech may exhibit slightly less flexibility in bending or tension due to its short fibers, its unparalleled strength ensures long-lasting support. Top furniture makers or hand-crafted furniture makers will only use beech. Birch Timber: A Close Contender While Birch timber offers excellent performance, it cannot be compared to Beech in terms of overall quality. Often utilised by reputable furniture brands like Ikea, Birch boasts a generally straight-grained structure with a fine, uniform texture. Its strength and durability rival that of Beech, making it a reliable choice for supporting your mattress. Birch timber may also feature a plain, occasionally curly, or wavy pattern, adding a subtle aesthetic appeal to your bed frame. Mass-market furniture often utilises birch. Poplar Timber: Budget-Friendly but Compromised Quality Poplar timber serves as a cost-effective option for bed slats, but it falls short in terms of quality compared to Beech and Birch. Characterised by its very pale colour and lack of distinct grain patterns, Poplar is considerably lighter in weight and less dense than its hardwood counterparts. While it may suffice for temporary or budget-conscious solutions, Poplar lacks the durability and longevity offered by Beech and Birch. Its use is often associated with lower-end furniture where cost takes precedence over quality. Choosing the Right Timber: Considerations and Recommendations As standard practice, sprung bed slats should ideally measure 8mm in depth for widths up to 1050mm. Birch slats may be manufactured at a slightly thinner 9mm depth, while Poplar slats are typically produced at a 10mm thickness due to their weaker nature. It's essential to note that when slats are produced thicker, finding replacement sprung bed slat holders may become challenging, as most holders manufactured in Europe by quality manufacturers are available in 8mm size. Additionally, for those seeking extra strength or spanning the bed width without multiple rows of slats, specialised 10mm and 12mm Beech sprung bed slats are available, although they are considered a specialist product. Conclusion: Selecting Quality for Long-Term Satisfaction Prioritising quality and durability is paramount when selecting the timber for your sprung bed slats. While Beech and Birch timber options offer superior strength, resilience, and aesthetics, Poplar serves as a more affordable alternative with inherent compromises. By investing in high-quality timber such as Beech or Birch, you guarantee enduring performance and long-term satisfaction with your bed frame's craftsmanship and aesthetics. This guide aims to provide valuable insights into the benefits of Beech timber, assisting you in making an informed decision that enhances your sleep quality and overall bedroom aesthetics.
Choosing Wisely: Number of Slats for Your Webbed Pine Bed Slat Set
Understanding the Gap Between Your Slats: A Guide to Optimal Bed Support Investing in a quality bed slat set is crucial for ensuring a restful and supportive sleep experience. However, with a plethora of options available, determining the ideal number of slats for your webbed pine bed slat set can be a daunting task. In this guide, we'll explore the importance of selecting the right number of slats and how it can impact the overall comfort and longevity of your mattress. Finding the Ideal Number of Slats:When it comes to choosing the ideal number of slats for your bed, more isn't always better. In fact, the ideal gap between slats is typically between 40mm to 50mm. This ensures proper support for your mattress while also allowing for adequate airflow, keeping your mattress fresh and comfortable. Sprung Bed Slats require a different spacing The Consequences of Insufficient Slats:Opting for too few slats can have several negative consequences. Firstly, your slats may not be compatible with your mattress, potentially invalidating the warranty. Additionally, insufficient slats may result in inadequate support for your mattress, leading to discomfort and sagging. Moreover, if the gap between slats is too large, it can shorten the lifespan of your mattress and affect its overall feel and comfort. Conclusion:Choosing the right number of slats for your webbed pine bed slat set is crucial for optimizing comfort and ensuring the longevity of your mattress. By selecting the appropriate number of slats and ensuring the correct gap between them, you can create a supportive and comfortable sleep surface that promotes restful sleep night after night.
Bed Frame Compatibility Guide For Webbed Pine Bed Slat Sets
Ensuring Compatibility with Flat Webbed Pine Bed Sets This guide aims to assist you in ensuring compatibility between our Flat Webbed Pine Bed Sets and your existing bed frame. The diversity in bed frame structures on the market underscores the absence of a standardized manufacturing approach, indicating that a one-size-fits-all solution is not applicable. At The Old Joinery - Berkhamsted, we manufacture all our Webbing Pine Bed Slats in-house, allowing for customization of the width and length to ensure they are compatible with your bed frame. Please refer to the example structures below, where we have indicated whether the Webbed Flat Bed Slats sets will be compatible, or if modifications are needed. We can generally provide you with the components required if needed. It's important to note that all bed frames that are 1000mm or larger require a bed central rail running down the length of the bed frame - from head to toe. If your bed frame structure is not compatible, don't worry. There should be a way to modify it or find an alternative bed slat solution where modification is not required. Our goal is to ensure that you find the perfect fit for your bed frame, whether through customization or alternative options. We're here to provide expert guidance and support throughout the process, ensuring that you achieve the optimal setup for your sleeping needs.
Measuring Made Simple: Guide to Flat Webbed Pine Bed Sets
This guide aims to assist you in obtaining accurate measurements when ordering Flat Webbed Pine Bed Sets.