Premium Second-Generation | Drop-In Slatted Bed Base
Product Details
Product Details
Second Generation Drop-In Slatted Bed Base with Beech Sprung Bed Slats
Our Second Generation Slatted Bed Base is Designed and Manufacture in-house by our Master Bed Makers. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.
This Drop-In Slatted Bed Bases are designed to sit within your bed frame and is manufactured order at you specified width and length.
Our Single Row Slatted Bed Bases are designed for One Sleepers and are suitable for the following bed sizes:
- Small Single Beds 2ft 6
- Single Beds 3ft
- Small Double Beds 4ft
Our Double Row Slatted Bed Bases are designed for Two Sleepers are suitable for the following Bed Sizes:
- Small Double Beds 4ft
- Double Beds 4ft 6
- European Double Beds 140cm
- King Size Bed 5ft
- European King Size Beds 160cm
- Super King Beds 6ft
- Emperor bed
Our Second Generation Single Row Bed Base consist of
- 30 Quality Beech Sprung Bed Slats (38mm x 8mm) for each sleeper - May vary depending on the length specified
- 50mm by 20mm Beech Multiplex Ply frame
- Twin Slat Holders, which are doweled into the side rails using Pegs to add strength and durability
- OPTIONAL: Adjustable slat tension adjusters in the lumbar region
- Fully Assembled in 1 or 2 pieces when delivered
All Slatted Bed Bases are assembled using Furniture Connector bolts and Cross Dowels. This provides a extremely strong joint and can also be disassembled and reassembled if needed
Technical Information:
Width - Custom
Length - Custom (Maximum 2000mm)
Height - Approximately 67mm
Gap in between Slats - Approximately 25mm
Optional Extras
Optional: Adjustable slat tension in the lumbar region
Second Generation adjustable tensions adjusters are placed in the lumber region to further improve your comfort level. These are also known as “rigidity adjusters”. There are three beech sprung slats per double slat holder with two second generation sliding tension adjusters. These tension adjusters in the lumber region, allow the sleeper to manually adjust the firmness of the bed in the lumbar region to their preference. Another added benefit is that you can adjust the tension independently from your partner.
10mm and 12mm sprung bed slats are not compatible with lumbar adjusters, so this option will not appear during the buying process.
Optional: Shoulder Zone Components
Our Special Shoulder Zone Components are a silent system, which is spring free meaning it is noise free. These components are able to rotate on both sides, and are able to be pushed down up to 23mm including the rotation. This will dramatically improve comfort and reduce pressure in the shoulder region. The Ledges where your Second Generation Slatted Bed Base is going to sit on cannot be NO more then 20mm deep and your centre rail/ support cannot be no more then 40mm wide; as these will interfere with the movement of our Shoulder Zone Components
Bed Frame Requirements
Our Slatted Bed Bases are built to last for years. Your bed frame must have adequate support for the slatted bed base.
The slatted bed base is there to support you and the bed frame needs to support the slatted bed base i.e. the ledges, where the slatted bases rests on should be strong enough to hold your weight.
A Centre Rail is not required for a Single Row Bed Base
How to Measure
Wooden Bed Frame
Our Single Row Slatted Bed Bases are designed to sit within you wooden bed frame. You must take accurate measurements on the internal dimension of your bed frame; taking into account anything that is protruding e.g. bed legs, corner brackets and so on
We advise taking exact internal measurements and minus 3mm to 4mm to ensure our bed base fittings within your bed frame.
Metal Bed Frames
Varies depending on the structure of Metal Bed Frame. Please email us images if you would like advise on compatibility
Other
Please note that the colour of the components may vary, for exact colours please call us.
Shipping & Return
Shipping & Return
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Share this product
Sustainable
Bed Base Designed and Manufactured in the UK
Custom WIDTH
Custom LENGTH
Worried about ACCESS? or ASSEMBLY?
Need it Quick? We can offer an EXPRESS service
BEECH Timber
Ergonomic
Airflow
Sustainable
Bed Base Designed and Manufactured in the UK
Custom WIDTH
Custom LENGTH
Worried about ACCESS? or ASSEMBLY?
Need it Quick? We can offer an EXPRESS service
BEECH Timber
Ergonomic
Airflow
From Our Journal
Helpful Articles and Buying Guides to find solution to common bed issues.
Understanding Sprung Bed Slats: Exploring Various Timbers
Comparing Timber Types: Beech, Birch, and Poplar for Sprung Bed Slats When it comes to choosing the right timber for your sprung bed slats, understanding the characteristics of each wood type is crucial. In this comprehensive guide, we'll explore three commonly used timbers for sprung bed slats: Beech, Birch, and Poplar. Beech Timber: The Undisputed Champion Renowned for its exceptional mechanical properties, Beech timber stands out as the premier choice for sprung bed slats. This hardwood boasts remarkable resistance to compression, making it ideal for supporting the weight of the mattress and sleeper. While Beech may exhibit slightly less flexibility in bending or tension due to its short fibers, its unparalleled strength ensures long-lasting support. Top furniture makers or hand-crafted furniture makers will only use beech. Birch Timber: A Close Contender While Birch timber offers excellent performance, it cannot be compared to Beech in terms of overall quality. Often utilised by reputable furniture brands like Ikea, Birch boasts a generally straight-grained structure with a fine, uniform texture. Its strength and durability rival that of Beech, making it a reliable choice for supporting your mattress. Birch timber may also feature a plain, occasionally curly, or wavy pattern, adding a subtle aesthetic appeal to your bed frame. Mass-market furniture often utilises birch. Poplar Timber: Budget-Friendly but Compromised Quality Poplar timber serves as a cost-effective option for bed slats, but it falls short in terms of quality compared to Beech and Birch. Characterised by its very pale colour and lack of distinct grain patterns, Poplar is considerably lighter in weight and less dense than its hardwood counterparts. While it may suffice for temporary or budget-conscious solutions, Poplar lacks the durability and longevity offered by Beech and Birch. Its use is often associated with lower-end furniture where cost takes precedence over quality. Choosing the Right Timber: Considerations and Recommendations As standard practice, sprung bed slats should ideally measure 8mm in depth for widths up to 1050mm. Birch slats may be manufactured at a slightly thinner 9mm depth, while Poplar slats are typically produced at a 10mm thickness due to their weaker nature. It's essential to note that when slats are produced thicker, finding replacement sprung bed slat holders may become challenging, as most holders manufactured in Europe by quality manufacturers are available in 8mm size. Additionally, for those seeking extra strength or spanning the bed width without multiple rows of slats, specialised 10mm and 12mm Beech sprung bed slats are available, although they are considered a specialist product. Conclusion: Selecting Quality for Long-Term Satisfaction Prioritising quality and durability is paramount when selecting the timber for your sprung bed slats. While Beech and Birch timber options offer superior strength, resilience, and aesthetics, Poplar serves as a more affordable alternative with inherent compromises. By investing in high-quality timber such as Beech or Birch, you guarantee enduring performance and long-term satisfaction with your bed frame's craftsmanship and aesthetics. This guide aims to provide valuable insights into the benefits of Beech timber, assisting you in making an informed decision that enhances your sleep quality and overall bedroom aesthetics.
Choosing Wisely: Number of Slats for Your Webbed Pine Bed Slat Set
Understanding the Gap Between Your Slats: A Guide to Optimal Bed Support Investing in a quality bed slat set is crucial for ensuring a restful and supportive sleep experience. However, with a plethora of options available, determining the ideal number of slats for your webbed pine bed slat set can be a daunting task. In this guide, we'll explore the importance of selecting the right number of slats and how it can impact the overall comfort and longevity of your mattress. Finding the Ideal Number of Slats:When it comes to choosing the ideal number of slats for your bed, more isn't always better. In fact, the ideal gap between slats is typically between 40mm to 50mm. This ensures proper support for your mattress while also allowing for adequate airflow, keeping your mattress fresh and comfortable. Sprung Bed Slats require a different spacing The Consequences of Insufficient Slats:Opting for too few slats can have several negative consequences. Firstly, your slats may not be compatible with your mattress, potentially invalidating the warranty. Additionally, insufficient slats may result in inadequate support for your mattress, leading to discomfort and sagging. Moreover, if the gap between slats is too large, it can shorten the lifespan of your mattress and affect its overall feel and comfort. Conclusion:Choosing the right number of slats for your webbed pine bed slat set is crucial for optimizing comfort and ensuring the longevity of your mattress. By selecting the appropriate number of slats and ensuring the correct gap between them, you can create a supportive and comfortable sleep surface that promotes restful sleep night after night.
Bed Frame Compatibility Guide For Webbed Pine Bed Slat Sets
Ensuring Compatibility with Flat Webbed Pine Bed Sets This guide aims to assist you in ensuring compatibility between our Flat Webbed Pine Bed Sets and your existing bed frame. The diversity in bed frame structures on the market underscores the absence of a standardized manufacturing approach, indicating that a one-size-fits-all solution is not applicable. At The Old Joinery - Berkhamsted, we manufacture all our Webbing Pine Bed Slats in-house, allowing for customization of the width and length to ensure they are compatible with your bed frame. Please refer to the example structures below, where we have indicated whether the Webbed Flat Bed Slats sets will be compatible, or if modifications are needed. We can generally provide you with the components required if needed. It's important to note that all bed frames that are 1000mm or larger require a bed central rail running down the length of the bed frame - from head to toe. If your bed frame structure is not compatible, don't worry. There should be a way to modify it or find an alternative bed slat solution where modification is not required. Our goal is to ensure that you find the perfect fit for your bed frame, whether through customization or alternative options. We're here to provide expert guidance and support throughout the process, ensuring that you achieve the optimal setup for your sleeping needs.
Measuring Made Simple: Guide to Flat Webbed Pine Bed Sets
This guide aims to assist you in obtaining accurate measurements when ordering Flat Webbed Pine Bed Sets.